SaiMetro PinkStudio · Pune

Mangalwar Peth · Pune · Since 2010

Pune's PinkStudio for PPF, ceramic & car upgrades.

Paint protection film, ceramic and graphene coatings, LED lights, Android systems and mods, done indoors under our pink LED ceiling by a team that's kept Pune's cars sharp since 2010.

  • Garware films
  • 29K on Instagram
  • Indoor studio
Scroll
years in the peths
16
Instagram family
29K
services, one roof
11

Protection Lab

Don't take our word for it. Try it.

Two quick experiments that show what film and coatings actually do.

Self-healing PPF

Drag across the panel to scratch it. Switch PPF on and watch light scratches fade with warmth, the way the film’s top coat recovers in the sun.

Drag to scratch

Illustration. Films heal light swirls and fine scratches; deep cuts need that section of film replaced.

Water test: coated vs bare

Move your cursor or tilt your phone to tip the bonnet. Coated paint beads water and sheds it; bare paint holds flat puddles that dry into spots.

Illustration of the hydrophobic effect.

60-second advisor

Which protection does your car actually need?

Five taps. We’ll suggest a setup and you can send it straight to us on WhatsApp.

  • Full-body PPF + ceramic top coat
  • Front-end PPF + ceramic coating
  • Graphene coating
  • Ceramic coating

Step 1 of 5

What do you drive?

Before / After

Drag to see the difference.

What paint correction, coating and restoration change, in one slider.

Illustration: on the left, dull paint with swirl marks and water spots that blur the reflection of the LED ceiling; on the right, the same panel corrected and coated, reflecting the ceiling lines sharply.

BeforeAfterIllustration

Handover day

The best part? Handing back the keys.

Every car leaves the PinkStudio the same way: checked, explained and handed over. A few recent ones.

Since 2010

Built in the peths. Lit up in pink.

SaiMetro has looked after Pune’s cars since 2010; the logo still says Estd. 2010. Today the work happens in the PinkStudio in Mangalwar Peth: an indoor bay where the criss-cross LED ceiling isn’t just for Instagram. Bright, even light shows up swirls and high spots that are easy to miss outdoors.

Same straight talk as always: we tell you what your car needs, what it doesn’t, and what it will cost before we start.

About

How a job runs

  1. 01

    Inspect

    We look at the paint under studio light and tell you what it needs, and what it doesn’t.

  2. 02

    Wash & decontaminate

    Foam, hand wash, iron and tar removal, so nothing gets sealed under film or coating.

  3. 03

    Correct

    Machine polishing for swirls and dull spots, where the job calls for it.

  4. 04

    Install / apply

    Film cut and fitted panel by panel, or coating layered and levelled.

  5. 05

    Cure & check

    Time to set, then a final check under the lights.

  6. 06

    Handover

    We walk you through aftercare and the warranty terms for your grade.

Quick answers

What Pune asks us most

All questions
How much does PPF cost in Pune?

It depends on four things: the film grade, your car's size and panel shapes, how much of the car you cover, and whether the paint needs correcting first. A front kit costs far less than full body. Our PPF price guide lists typical Pune market ranges. For your own car, send us the model on WhatsApp and we'll quote. Asking in Marathi is fine too: PPF kiti kharch yeto?

How long does PPF take, and when can I wash the car?

A front kit typically takes 1–2 days and full-body PPF 3–5 working days, including time for the film to settle. We confirm the exact time when you book. Garware's warranty cards rule out washing for the first 48 hours, while the adhesive cures. After that, hand wash with a pH-neutral shampoo and keep pressure-washer jets away from the film edges.

PPF or ceramic coating: which should I choose?

Choose PPF if stone chips and scrapes worry you, and a coating if you want gloss and easy washing. Film is a thick, self-healing layer that absorbs impacts; a coating is a few microns thick and won't stop a chip. Many owners do both: film on the front or the whole car, then a coating over film and paint. Our PPF vs ceramic coating guide compares them.

How long does ceramic coating last in Pune?

It depends on the grade you choose and how the car is washed and parked. The grade sets the ceiling; your habits decide how close you get. Open parking through summer, monsoon grime and brush washes wear any coating faster, while gentle hand washing and the maker's periodic checks keep it working. Or as many ask us, coating kiti varsha tikta? We'll give you the maker's figure for your grade.

What is engine decarbonisation, and does it improve mileage?

It's a cleaning process, using hydrogen or chemical cleaners, that removes carbon deposits from the intake, valves, injectors and combustion chamber without opening up the engine. It typically takes 1–2 hours. Many owners notice smoother idle and response; results depend on engine condition, and nobody can promise a mileage gain. Or as people ask us, decarb kelyane mileage vadhto ka? Sometimes, not always.

How do I book: WhatsApp, call or walk in?

Any of the three works, and WhatsApp is easiest because you can send photos. Send your car's model and year, what you'd like done and a couple of pictures, and we'll reply with a quote and a date. You can also call us, or walk in to the PinkStudio in Mangalwar Peth. Message us on WhatsApp for today's timings before you set off.

Visit the PinkStudio

Mangalwar Peth, Pune.

Central Pune, close to the railway station. Message us before you come so we can plan your slot.

Address
SaiMetro Car Accessories & Detailing
Mangalwar Peth, Pune, Maharashtra 411011
Timings
Call or WhatsApp for today’s timings

Coming from across Pune? Drive times & directions

Map of central Pune showing the SaiMetro PinkStudio in Mangalwar PethMap of central Pune showing the SaiMetro PinkStudio in Mangalwar Peth
Map data © OpenStreetMap contributors